Welcome to ISAserver.org

1 LAN and 2 ROUTERS

Users viewing this topic: none

Logged in as: Guest

Printable Version

All Forums >> [ISA 2006 General] >> Installation and Planning >> 1 LAN and 2 ROUTERS

Page: [1]

Message

<< Older Topic Newer Topic >>

1 LAN and 2 ROUTERS - 15.Apr.2008 11:37:40 AM

lankan

Posts: 12
Joined: 14.Aug.2002
Status: offline

Hello
I am have the following configuration with ISA 2006 std.
Server with 2 NIC.
NIC1 - LAN: 10.200.75.0/24
NIC2 - DSL: 192.168.1.1/24 G/W 192.168.1.1
FW Client installed on LAN PCs.

Everything works well and possible to browse Internet .

Now, we have linked few branches using a IP-VPN technology and they are connected through a CISCO router within the LAN. This router IP is 10.2.75.254.
Branch IPs are subnetted and 192.168.150.0/248

I have created specifict routing entries to all branch subnets in the ISA server using ROUTE ADD command in command prompt.

While ISA service is DOWN, I am able to ping all these subnets at the branches from ISA Server. But, when the ISA service is up, no communication between the ISA and branches.

How do I make this happen? I want to allow selected IP s from branches to browse Internet through our ISA server.

Thank you in advance

Maluwa