Welcome to ISAserver.org

Auto Discovery - WPAD

Users viewing this topic: none

Logged in as: Guest

Printable Version

All Forums >> [ISA 2006 Web Proxy] >> Unihomed >> Auto Discovery - WPAD

Page: [1]

Message

<< Older Topic Newer Topic >>

Auto Discovery - WPAD - 6.Dec.2007 5:54:24 AM

oconnojo

Posts: 4
Joined: 7.Jun.2007
Status: offline

Hi,

Could somone please help me regarding the configuration of WPAD. I'm using ISA2006 Std. in single NIC mode and I have done the following:

Created an A record DNS entry for wpad.domain using the ip address of the ISA 2006 server.
Enabled the "Publish Auto Discovery for this network" option within - Internal Networks - Auto discovery - port 80
Enabled "Bypass proxy for web servers in this network"
Enabled "Direct access computers specified in the Domains tab"
Added in all the urls's & ip address entries within the "Directly access these servers or domains"
Domains Tab - *.domainname
WebProxy Tab = "Enable web proxy client connections for this network" is enabled.
WebProxy Tab = "Enable HTTP" is enabled.
WebProxy Tab = "HTTP Port" = 8080
WebProxy Tab = Authentication is enabled for Integrated.

My Firewall policy uses Internet access for http, https & ftp from internal and local host to Internal and condtion = "All authenticated users"

When I check my IE settings I can see that the "Automatically detect settings" is ticked/enabled but when I go to a website it just shows me the "Connecting to sites ip address" and then displays The page cannot be displayed.

When I try to browse to http://wpad/wpad.dat I get HTTP Error 404 - the file could not be found. But when I browse to http://wpad:8080/wpad.dat it then produces the wpad file and I can see all my entries as I defined within ISA.

Could you tell me how to overcome this problem please.

If you need any further info please let me know.

Any help would be appreciated.

Many Thanks,

John.