Welcome to ISAserver.org

Branch Office Site2Site 1 ISA2006 Server

Users viewing this topic: none

Logged in as: Guest

Printable Version

All Forums >> [ISA 2006 Firewall] >> Branch Office >> Branch Office Site2Site 1 ISA2006 Server

Page: [1]

Message

<< Older Topic Newer Topic >>

Branch Office Site2Site 1 ISA2006 Server - 1.Jan.2008 7:33:32 PM

bugsmoran

Posts: 14
Joined: 21.Feb.2002
Status: offline

Is it possible to connect the Branch office and Main office without two ISA servers? I need to connect via VPN an ISA2006 server at the Main Office and a Windows 2003 Server at the Branch Office which uses Demain-Dial. The Demain-Dial interface works and the Branch clients can see resources at the Main office; however, I have not been able to figure out how to get the Main office to connect to resources at the Branch. What do I need to do with the ISA2006 server so it will connect via VPN to the Branch 2003 server and route traffic from the Main network to the Branch? Any help and or ideas would be greatly appreciated.

Post #: 1

Featured Links*

RE: Branch Office Site2Site 1 ISA2006 Server - 1.Jul.2008 8:16:18 AM

tshinder

Posts: 47181
Joined: 10.Jan.2001
From: Texas
Status: offline

Yes, this is possible. However, I don't remember if I wrote an article on how to do this. You create the demand dial interface manually on the branch office, and use the wizard on the ISA firewall.

Remember that the branch office clients will need to use the RRAS server as their gateway to the network IDs that are behind the main office ISA firewall.

HTH,
Tom

_____________________________

Thomas W Shinder, M.D.
Sr. Consultant/Technical Writer
Prowess Consulting http://www.prowessconsulting.com/
Blog: http://blogs.isaserver.org/shinder/

GET THE NEW ISA 2006 Book!: http://tinyurl.com/2gpoo8

(in reply to bugsmoran)