Welcome to ISAserver.org

Can't publish using multiple IP address

Users viewing this topic: none

Logged in as: Guest

Printable Version

All Forums >> [ISA 2006 Publishing] >> Web Publishing >> Can't publish using multiple IP address

Page: [1]

Message

<< Older Topic Newer Topic >>

Can't publish using multiple IP address - 31.Jul.2008 6:12:52 PM

adsony@gmail.com

Posts: 3
Joined: 31.Jul.2008
Status: offline

I'm using ISA2006 with 2 NIC (external and Internal). The external NIC has multiple IP addresses (196.40.x.1 to 196.40.x.10).

The web and server publishing rules works fine for 196.40.x.1 but for 196.40.x.2 and 3 and all other IP addresses does not work. I've created a web listener for each and every IP.

196.40.x.1 is the default IP for the external NIC.

How do I web and server publish using all the other IP addresses?

Thanks

Post #: 1

Featured Links*

RE: Can't publish using multiple IP address - 1.Aug.2008 7:43:39 AM

paulo.oliveira

Posts: 929
Joined: 3.Jan.2008
From: Amazonas, Brazil
Status: online

Hi,

what the conf of ISA�s NICs? What�s the error log for the other publishing rules?

Regards,
Paulo Oliveira.

(in reply to adsony@gmail.com)

Post #: 2

RE: Can't publish using multiple IP address - 1.Aug.2008 7:51:23 AM

gbarnas

Posts: 151
Joined: 27.Apr.2005
From: New Jersey
Status: offline

Are all the required IP addresses bound to the external NIC? Do an IPConfig and verify that the additional IP addresses show up under the External NIC's list. If they're not there, add them to the TCPIP properties / Advanced tab for that NIC.

Glenn

(in reply to adsony@gmail.com)

Post #: 3

RE: Can't publish using multiple IP address - 1.Aug.2008 8:49:25 AM

adsony@gmail.com

Posts: 3
Joined: 31.Jul.2008
Status: offline

Yes, all IPs are bound to the external NIC.

The log just says initiating the connection but 0 byte sent and 0 byte received then the connection is closed.

(in reply to gbarnas)

Post #: 4

RE: Can't publish using multiple IP address - 11.Aug.2008 6:27:28 PM

adsony@gmail.com

Posts: 3
Joined: 31.Jul.2008
Status: offline

My network config are as follows:

Ethernet adapter External:
Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 196.xx.xx.31
Subnet Mask . . . . . . . . . . . : 255.255.255.0
IP Address. . . . . . . . . . . . : 196.xx.xx.29
Subnet Mask . . . . . . . . . . . : 255.255.255.0
IP Address. . . . . . . . . . . . : 196.xx.xx.28
Subnet Mask . . . . . . . . . . . : 255.255.255.0
IP Address. . . . . . . . . . . . : 196.xx.xx.27
Subnet Mask . . . . . . . . . . . : 255.255.255.0
IP Address. . . . . . . . . . . . : 196.xx.xx.30
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 196.xx.xx.1
Ethernet adapter Internal:
Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 192.168.0.1
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
DNS Servers . . . . . . . . . . . : 192.168.0.12
192.168.0.13

I have HTTP and Terminal Service (Port 3389) access to 196.xx.xx.30 which is the default IP on the external network card but I can not access any other IP address on the external network card.

Please help.

Thanks

(in reply to adsony@gmail.com)

Post #: 5