Welcome to ISAserver.org

ICMP failre

Users viewing this topic: none

Logged in as: Guest

Printable Version

All Forums >> [ISA Server 2000 General] >> Installation >> ICMP failre

Page: [1]

Message

<< Older Topic Newer Topic >>

ICMP failre - 16.Feb.2001 8:18:00 PM

Poperzky

Posts: 10
Joined: 16.Feb.2001
From: Salt Lake City, UT USA
Status: offline

Initial vanilla install of ISA did not allow me to ICMP through my server.
Both external and internal nics respond to ICMP's but will not pass through
the server. I followed the instructions on ISAServer.org and created rules
opening everything up, all services (telnet, ftp, etc..) work with the
exception of ICMP.

Thanks,

Terry Poperszky
tpop@sosstaffing.com

Post #: 1

Featured Links*

RE: ICMP failre - 16.Feb.2001 10:00:00 PM

tshinder

Posts: 47490
Joined: 10.Jan.2001
From: Texas
Status: offline

Enable IP Routing

Configure the client as a SecureNAT client.

Then you'll be able to ping through the ISA Server.

HTH,
Tom

------------------
Tom Shinder
http://www.isaserver.org/shinder/

(in reply to Poperzky)

Post #: 2

RE: ICMP failre - 16.Feb.2001 10:29:00 PM

Poperzky

Posts: 10
Joined: 16.Feb.2001
From: Salt Lake City, UT USA
Status: offline

Worked.

Thanks

(in reply to Poperzky)

Post #: 3

RE: ICMP failre - 22.Feb.2001 6:01:00 PM

rednar

Posts: 24
Joined: 15.May2001
Status: offline

Just a stupid question but how can I configure a client as secure lat?

(in reply to Poperzky)

Post #: 4

RE: ICMP failre - 22.Feb.2001 6:04:00 PM

Poperzky

Posts: 10
Joined: 16.Feb.2001
From: Salt Lake City, UT USA
Status: offline

Not stupid, the name fooled me at first as well. Basically, all you have to do is make sure the firewall client is not installed and then point the default gateway to your ISA server.

Terry

(in reply to Poperzky)

Post #: 5