Welcome to ISAserver.org

Network configuration error&Server publishing

Users viewing this topic: none

Logged in as: Guest

Printable Version

All Forums >> [ISA Server 2004 General ] >> Installation >> Network configuration error&Server publishing

Page: [1]

Message

<< Older Topic Newer Topic >>

Network configuration error&Server publishing - 12.Feb.2004 9:21:00 AM

zhangmeibo

Posts: 87
Joined: 11.Feb.2004
From: China
Status: offline

hi , all

I found a network configuration error in monitoring:
Alart : configuration error
Description: ISA Server detected routes through adapter "Loopback" that do not correlate with the Network Element this adapter belongs to. The address ranges in conflict are: 218.88.83.121-218.88.83.121;. Fix the Network Element and/or the Routing Table to make these ranges consistent -- they should be in both or in neither.
I use a dial-up adsl modem to internet , 218.88.83.121 is my adsl dial-up get's IP . In my internal network , I only select my lan 192.168.0.1 to 192.168.0.255 . How can I repair this error ? Redefine my internal network to contain this ip 218.88.83.121 ? But this ip is dynamic ,if I reconnect dial-up , need I redefine internal network again ?
I aslo has problem in server publish.Because My external ip is dynamic , how can I publish my ftp server ?

[ February 13, 2004, 07:11 AM: Message edited by: meibo ]

Post #: 1

Featured Links*

RE: Network configuration error&Server publishing - 13.Feb.2004 6:10:00 AM

tshinder

Posts: 47490
Joined: 10.Jan.2001
From: Texas
Status: offline

Hi Meibo,

Is the Internal network the only network you've configured so far?

Thanks!
Tom

(in reply to zhangmeibo)

Post #: 2

RE: Network configuration error&Server publishing - 13.Feb.2004 6:53:00 AM

zhangmeibo

Posts: 87
Joined: 11.Feb.2004
From: China
Status: offline

hi , Tom
First thx for your reply , I'am just thinking about mail to you for my problem. [Smile]

At present, I has configured only internal network(192.168.0.0/24), now the error is disappeared , I don't know whether it appears when I restart ISA services.
After reading help and trial of mine , now I know how to publish server on dynamic IP , but I has another problem : my clients can't get ip address from dhcp server in ISA internal nic .
I will post a new topic to depict it . [Smile]

(in reply to zhangmeibo)

Post #: 3

RE: Network configuration error&Server publishing - 13.Feb.2004 4:52:00 PM