Welcome to ISAserver.org

P2V ISA 2006

Users viewing this topic: none

Logged in as: Guest

Printable Version

All Forums >> [ISA 2006 General] >> General >> P2V ISA 2006

Page: [1]

Message

<< Older Topic Newer Topic >>

P2V ISA 2006 - 20.Oct.2008 12:07:23 PM

GeoTech

Posts: 26
Joined: 23.May2001
From: Richmond, VA USA
Status: offline

I would like to P2V my ISA 2006 standard edition box to Hyper-V using System Center Virtual Machine Manager (beta). I have successfully P2V several boxes so far but run into the following error with ISA. I have tried creating a remote management access rule, and removing the "enforce strict RPC" from my internal network but still no go. I have only found one other reference (link below) to the problem on the net and it is not very helpful, recommending "dropping firewall on management network".

http://forums.microsoft.com/TechNet/ShowPost.aspx?PostID=4023147&SiteID=17&mode=1

Thanks in advance! Ken

VMM is unable to complete the request. The connection to the agent ISA1.corp.mycompany.com was lost.
Ensure that the WMI service and the agent are installed and running and that a firewall is not blocking HTTP and WMI traffic.
ID: 3157
Details: The RPC server is unavailable (0x800706BA)

Post #: 1

Featured Links*

RE: P2V ISA 2006 - 20.Oct.2008 12:48:50 PM

tshinder

Posts: 50013
Joined: 10.Jan.2001
From: Texas
Status: offline

Hi Geo,

Create an all open rule between the SCVMM machine and the internal interface of the firewall. Make sure it's all open to the firewall and from the firewall to the SCVMM machine.

Then disable the RPC filter and reboot the firewall.

Do the P2V. After that, enable the RPC filter and delete the rule.

Reboot the firewall.

HTH,
Tom

_____________________________

Thomas W Shinder, M.D.

(in reply to GeoTech)

Post #: 2

RE: P2V ISA 2006 - 21.Oct.2008 8:25:50 AM

SteveMoffat

Posts: 1130
Joined: 29.Jun.2001
From: Hamilton, Bermuda
Status: offline

I agree with Tom, Just had to do that myself. Works fine.

_____________________________

Thanks
Steve

ISA 2006 Book! - http://tinyurl.com/2gpoo8
TMG Bible - http://tinyurl.com/ykv85hr
www.isaserver.bm

The built in ISA help is likely the most comprehensive help built into an application anywhere. USE it!!! Search it!!! RTFM

(in reply to tshinder)

Post #: 3

RE: P2V ISA 2006 - 21.Oct.2008 8:34:24 AM

GeoTech

Posts: 26
Joined: 23.May2001
From: Richmond, VA USA
Status: offline

Tom, Thanks so much, I tried it last night and it worked perfectly. Ken

(in reply to SteveMoffat)

Post #: 4

RE: P2V ISA 2006 - 22.Oct.2008 6:59:47 AM

tshinder

Posts: 50013
Joined: 10.Jan.2001
From: Texas
Status: offline

Hi Ken,

Great! Good to hear you got it working and thanks for the follow up.

Tom

_____________________________

Thomas W Shinder, M.D.

(in reply to GeoTech)

Post #: 5

RE: P2V ISA 2006 - 28.Mar.2012 10:34:03 AM

mpmk87

Posts: 1
Joined: 28.Mar.2012
Status: offline

I realise this is an old thread, but I am trying to p2v my ISA 2006 box and I can't seem to get it started, can someone confirm the exact steps I need to follow to convert for Hyper-V please?

(in reply to tshinder)

Post #: 6

RE: P2V ISA 2006 - 12.Apr.2012 9:17:05 PM