Welcome to ISAserver.org

Server 2008 to Server 2008 RRAS Site to Site

Users viewing this topic: none

Logged in as: Guest

Printable Version

All Forums >> [ISA 2006 General] >> General >> Server 2008 to Server 2008 RRAS Site to Site

Page: [1]

Message

<< Older Topic Newer Topic >>

Server 2008 to Server 2008 RRAS Site to Site - 23.Nov.2007 5:38:46 AM

Adam1986

Posts: 1
Joined: 21.Nov.2007
Status: offline

Hi guys,

I appreciate this isnt really the right forum, but i really need some help, and have used this site previously in the past, and im hopeing someone might have had some experience with this issue. As previously when i had 2003 - 2003 RRAS site to site, it worked fine, and now it doesnt with server 2008 - 2008 RRAS :

I have just decided to give the 2008 RC0 a try on a couple of my machines at both sites. I have tried setting up the Site to Site RRAS exactly the same as it was previously but encountering issues.

I can connect to each other with no errors, but i cant ping any device from either side, i have setup the static routes as they were previously but there is no difference.

I am manually assigning addresses from both sides rather than using DHCP, one end is 192.168.0.130 - 135 and the other is 192.168.1.130 - 135.

Just to check there were no errors i tried my previous configuration of a 2003 -> 2008 server, and from the 2008 server i can ping the 2003 machines and all the devices on that subnet, but from the 2003 end i cant ping anything over on that subnet. Definately seems to be an issue with 2008 RRAS (or a new config?)

Please can anyone help? i'm beginning to tear my hair out :-(