Welcome to ISAserver.org

Forums | Register | Login | My Profile | Inbox | RSS RSS icon | My Subscription | My Forums | Address Book | Member List | Search | FAQ | Ticket List | Log Out

Server Publishing rule doesn't work

Users viewing this topic: none

Logged in as: Guest
  Printable Version
All Forums >> [ISA Server 2004 General ] >> Server Publishing >> Server Publishing rule doesn't work Page: [1]
Login
Message << Older Topic   Newer Topic >>
Server Publishing rule doesn't work - 1.Aug.2008 5:13:11 AM   
RonaldL

 

Posts: 1
Joined: 1.Aug.2008
Status: offline 		I'm trying to publish an internal server (10.1.1.1) for users on the internet using isa.

Setup:

Internet
|
|Firewall| -(lan)- |server| 10.1.1.1
|
(dmz)
|
|isa| 10.2.1.1

Our ISA is a single-NIC in our DMZ. We have a third-party firewall, which has 3 NICs.

No matter what I do, it always ends up in the default rule.

Here are my steps:
1. Create new Server Publishing rule
2. Enter ip of the published internal server : 10.1.1.1
3. Created a new Protocol ESB, inbound tcp port 2306
4. Listen for requests from these networks : Internal (Firewall NATs, so requests appear to be coming from DMZ interface of the firewall)
5. Checked 'Requests appear to be coming from ISA Server'

I think this should be it, but it doesn't work.
Where am I going wrong?
Post #: 1
RE: Server Publishing rule doesn't work - 1.Aug.2008 6:52:37 AM   
Jason Jones

 

Posts: 2140
Joined: 30.Jul.2002
From: United Kingdom
Status: online 		You cannot use server publishing with a single NIC ISA Server deployment. You will need (and you should have) at least two NICs in your ISA Server...

_____________________________

Jason Jones (MVP)

Silversands Limited http://www.silversands.co.uk
My Blog: http://blog.msfirewall.org.uk/

Get our NEW ISA 2006 Book!: http://tinyurl.com/2gpoo8

(in reply to RonaldL)
Post #: 2
RE: Server Publishing rule doesn't work - 1.Aug.2008 12:24:50 PM   
Rotorblade

 

Posts: 973
Joined: 27.Feb.2007
Status: offline 		Hi,

You will need to add an additional NIC. Server publishing is not supported running in "hork" mode.

RB

_____________________________

David Melvin
Ohio
MCSE: Security 2003, MCSA:Security 2003

(in reply to RonaldL)
Post #: 3
RE: Server Publishing rule doesn't work - 1.Aug.2008 12:27:04 PM   
Rotorblade

 

Posts: 973
Joined: 27.Feb.2007
Status: offline 		Sorry JJ, when I went to reply, no one had posted a reply.

Dave

_____________________________

David Melvin
Ohio
MCSE: Security 2003, MCSA:Security 2003

(in reply to RonaldL)
Post #: 4
RE: Server Publishing rule doesn't work - 1.Aug.2008 1:06:42 PM   
Jason Jones

 

Posts: 2140
Joined: 30.Jul.2002
From: United Kingdom
Status: online
quote:

ORIGINAL: Rotorblade

Sorry JJ, when I went to reply, no one had posted a reply.

Dave


No worries Dave - that's two people telling him NO which is good 

_____________________________

Jason Jones (MVP)

Silversands Limited http://www.silversands.co.uk
My Blog: http://blog.msfirewall.org.uk/

Get our NEW ISA 2006 Book!: http://tinyurl.com/2gpoo8

(in reply to Rotorblade)
Post #: 5
RE: Server Publishing rule doesn't work - 2.Aug.2008 12:07:03 PM   
spouseele

 

Posts: 12782
Joined: 1.Jun.2001
From: Belgium
Status: offline 		Hi Ronald,

you should definitely read http://blogs.technet.com/yuridiogenes/archive/2008/07/30/do-you-really-know-what-is-and-what-is-not-supported-on-isa-server.aspx.

HTH,
Stefaan

(in reply to Jason Jones)
Post #: 6

Page:   [1] << Older Topic    Newer Topic >>
All Forums >> [ISA Server 2004 General ] >> Server Publishing >> Server Publishing rule doesn't work Page: [1]
Jump to:

New Messages No New Messages
Hot Topic w/ New Messages Hot Topic w/o New Messages
Locked w/ New Messages Locked w/o New Messages
 Post New Thread
 Reply to Message
 Post New Poll
 Submit Vote
 Delete My Own Post
 Delete My Own Thread
 Rate Posts