Welcome to ISAserver.org

Setting ISA2004 with a router/broadband firewall

Users viewing this topic: none

Logged in as: Guest

Printable Version

All Forums >> [ISA Server 2004 General ] >> General >> Setting ISA2004 with a router/broadband firewall

Page: [1]

Message

<< Older Topic Newer Topic >>

Setting ISA2004 with a router/broadband firewall - 13.Mar.2004 10:14:00 AM

ecclairvoyant1959

Posts: 10
Joined: 6.Mar.2004
Status: offline

Hi there,
Here the problem i have in setting up ISA 2004.

The SCOPE:

Having by ISA 2004 connected to my SMC Baricade the to my local switch (clients).

Here the hardware configuration:

Windows server 2003
ISA 2004 )beta)
SMC Barricade router firewall

Here the network config

On ISA

WAN (set to automatic ip address) from my ISP

LAN
IP: 192.168.0.245
Sub: 255.255.255.0
Gateway: n/a
DNS: 192.168.0.245

SMC routeur
LAN IP 192.168.0.246
WAN side (Normally automatic IP from my ISP now it is connect via my ISA LAN card is it ok??

DHCP
Win Server 2000 192.168.0.251

HERE THE Cable setup.

From my modem-cable to my IAS 2004 WAN's card. Then a cable from my ISA 2004 LAN's to my SMC Barricade (using a cross over cable) into the WAN slot on the SMC Barricade, then a cable from the front of the SMC Barricade to my 8 ports switchs.

PROBLEM.

My clients are not able to access the WEB.

Here there something wrong i have done???

[ March 13, 2004, 12:46 PM: Message edited by: ecclairvoyant1959 ]