Welcome to ISAserver.org

Terminal Server Publishing

Users viewing this topic: none

Logged in as: Guest

Printable Version

All Forums >> [ISA Server 2004 General ] >> Server Publishing >> Terminal Server Publishing

Page: [1]

Message

<< Older Topic Newer Topic >>

Terminal Server Publishing - 12.May2005 4:13:00 PM

fgili

Posts: 11
Joined: 24.Jun.2003
From: London
Status: offline

Hi

I have three Terminal Servers I would like to Bind each of them to a different public IP addresses.

I have entered 3 Public IP addresses from our ISP to the external interface of the ISA Server 2004 but when I try to create a server publishing rule only the main IP address is available to select for the listener.

is this normal? if it is how can I get this configuration setup on the ISA2004

I can do that with netscreen Firewall with no problem.

Please help.

Post #: 1

Featured Links*

RE: Terminal Server Publishing - 13.May2005 10:58:00 PM

Rievax

Posts: 40
Joined: 13.Oct.2004
Status: offline

Hello,

The network object representing you public NIC should be refreshed. You may also have a bad subnet mask / routing information for this interface.

Xavier.

(in reply to fgili)

Post #: 2

RE: Terminal Server Publishing - 16.May2005 6:22:00 PM

fgili

Posts: 11
Joined: 24.Jun.2003
From: London
Status: offline

thanks it is working now by disabling and re enabling the Public NIC

(in reply to fgili)

Post #: 3

RE: Terminal Server Publishing - 7.Sep.2005 3:30:00 AM

lambch0p

Posts: 1
Joined: 7.Sep.2005
Status: offline

Hi,

I am trying to publish some servers using alternative ports on the ISA server. The network configuration was created before I started, and is set up in a perimeter configuration. I am trying to RDP from the perimeter network into the internal network, but am being blocked by the default rule. The logging shows 'Unidentified IP Traffic'. My rule states that the ISA server should listen on 6140 and forward to the default port on the published server. I have created exactly the same rules on another ISA 2004 server and they work fine. The only difference is that server is configured as an Edge ISA server, and I am RDPing in from the external network.

Any help would be appreciated.

Thanks

(in reply to fgili)

Post #: 4