Welcome to ISAserver.org

Terminal server admin mode

Users viewing this topic: none

Logged in as: Guest

Printable Version

All Forums >> [ISA Server 2000 Firewall] >> DMZ >> Terminal server admin mode

Page: [1]

Message

<< Older Topic Newer Topic >>

Terminal server admin mode - 8.Oct.2002 3:35:00 PM

Yves

Posts: 32
Joined: 27.Feb.2001
From: Belgium
Status: offline

Hi all,

Hope you can help me.
Here is my config
LAN--ISAinternal-DMZ-ISAexternal---Internet

I installed terminal server in remote administration mode
on both ISAs.From my LAN I can use it to administer the
first ISA but not the second one.
How can I do to administer the second one?????
The external interface of the ISAexternal is dynamic.

Please help me

thanks
.

Post #: 1

Featured Links*

RE: Terminal server admin mode - 8.Oct.2002 10:45:00 PM

spouseele

Posts: 12782
Joined: 1.Jun.2001
From: Belgium
Status: offline

Hi Yves,

first of all, it is a recommended that the TS is only bound to the ISA internal interface. In Terminal Service Configuration, under the node connections select RDP-Tcp Properties and the tab Network Adapter. There you can choose to which adapter the service must bind.

Second, to the inner ISA server, the outer ISA is just an external destination. So, on the inner ISA you should enable the RDP protocol in a protocol rule and make sure that the internal interface of the outer ISA is allowed in a site&content rule.

HTH,
Stefaan

(in reply to Yves)

Post #: 2