Welcome to ISAserver.org

Trouble using second ip-adress for web server

Users viewing this topic: none

Logged in as: Guest

Printable Version

All Forums >> [ISA 2006 Publishing] >> Web Publishing >> Trouble using second ip-adress for web server

Page: [1]

Message

<< Older Topic Newer Topic >>

Trouble using second ip-adress for web server - 14.Jul.2008 8:04:55 AM

Bandit

Posts: 14
Joined: 13.Jun.2008
From: Stockholm, Sweden
Status: offline

Setup:

ISA Server 2006 Standard with SP1
3Nic´s:
LAN172.16.1.1
Internert: 83.241.x.2
Internet2 83.241.x.3
DMZ: 10.0.0.1
Both 83.241x.x adresses are on the same NIC.

Problem:
When I publish a WEB-server och 83.241.x.2 on it works fine, but when I do the same on 83.241.x,3 it dosen´t work... Can´t underastand why. The rules are identical in all other ways but the IP-adress.
The web server is located on DMZ adress 10.0.0.2. And the network rule is NAT both ways.

Appreciate any tips and comments.

Thank you.

Post #: 1

Featured Links*

RE: Trouble using second ip-adress for web server - 14.Jul.2008 4:28:54 PM

rm_knight

Posts: 8
Joined: 28.Jan.2004
From: Poole, UK
Status: offline

Hi,

What is the subnet mask of your internet connection?

Regards,

Rich.

(in reply to Bandit)

Post #: 2

RE: Trouble using second ip-adress for web server - 15.Jul.2008 3:04:24 AM

Bandit

Posts: 14
Joined: 13.Jun.2008
From: Stockholm, Sweden
Status: offline

Ok, got it working now. I had to check the " Allow client authentication over HTTP" checkbox. Why is that? The site does not require any authentication.

< Message edited by Bandit -- 15.Jul.2008 3:38:29 AM >

(in reply to rm_knight)

Post #: 3

RE: Trouble using second ip-adress for web server - 15.Jul.2008 4:37:01 AM

Jason Jones

Posts: 2247
Joined: 30.Jul.2002
From: United Kingdom
Status: offline

Some part of it must...

_____________________________

Jason Jones (MVP)

Silversands Limited http://www.silversands.co.uk
My Blog: http://blog.msfirewall.org.uk/

Get our NEW ISA 2006 Book!: http://tinyurl.com/2gpoo8

(in reply to Bandit)

Post #: 4