Welcome to ISAserver.org

VPN Remote Site (unable to use 0.0.0.0 with IPSec)

Users viewing this topic: none

Logged in as: Guest

Printable Version

All Forums >> [ISA Server 2004 Firewall] >> VPN >> VPN Remote Site (unable to use 0.0.0.0 with IPSec)

Page: [1]

Message

<< Older Topic Newer Topic >>

VPN Remote Site (unable to use 0.0.0.0 with IPSec) - 18.Nov.2004 9:36:00 AM

wbplomp

Posts: 138
Joined: 18.Nov.2004
From: Netherlands, The
Status: offline

I have a problem with a IPSec VPN connection using ISA Server 2004.
I have connected a THOMSON/Alcatel SpeedTouch 610i VPN router using IPSec tunnel as a remote site. (VPN)

We have a large enterprise network with more than 180 subnets. (Main office)
The remote site uses 10.150.25.0/24. (Branch office)

I want to configure the branch office to use the IPSec tunnel as the default route to the main office.
But when I configure the SpeedTouch with 0.0.0.0 as the remote network, it does not accept is because of the IPSec policy.
I seems to work fine when I use a subnet wich is defined in my Internal network on the ISA Server.

How can I use the IPSec tunnel as the default route to our main office.
We are a construction company, I need these for building locations.

Please help me out with this problem!

Kind regards,

Boudewijn Plomp