Welcome to ISAserver.org

Which Network Template do I choose

Users viewing this topic: none

Logged in as: Guest

Printable Version

All Forums >> [ISA Server 2004 Firewall] >> Network Infrastructure >> Which Network Template do I choose

Page: [1]

Message

<< Older Topic Newer Topic >>

Which Network Template do I choose - 11.Aug.2004 5:11:00 PM

dilse

Posts: 11
Joined: 28.May2003
Status: offline

I have the following:

1 x ADSL Connection
1 x Hardware Firewall/Router
1 x External Interface
1 x Internal Interface

ISA 2004 has the 2 NIC's Installed

Internal = 10.0.0.1
External = 192.168.0.1
Router = 192.168.254.254

Should I choose the Back End Mode ? If so, how would I configure the IP's and would the External Interface, become an internal ?

Or... should I leave it as it is, as the Edge ?

Post #: 1

Featured Links*

RE: Which Network Template do I choose - 12.Aug.2004 5:50:00 PM

tshinder

Posts: 47439
Joined: 10.Jan.2001
From: Texas
Status: online

Hi BK,

Do NOT use the Network Templates. Instead, configure the external interface with the IP address that is 192.168.254.253 with a default gateway of 192.168.254.254.

Then create Access Rules that allow the traffic you want to allow outbound.

HTH,
Tom

(in reply to dilse)

Post #: 2

RE: Which Network Template do I choose - 12.Aug.2004 10:19:00 PM

dilse

Posts: 11
Joined: 28.May2003
Status: offline

Tom,

Thanks for the confirmation, this is what I am currently using.

But I cannot get things to work as they did on ISA 2000.

I have 2000 on another box, due to the problems I am experiencing with 2004. Cannot get the publishing rules to work.

I have a post open at: http://forums.isaserver.org/ultimatebb.cgi?ubb=get_topic;f=22;t=000057

Please advise, if you can think of anything.

(in reply to dilse)

Post #: 3