Welcome to ISAserver.org

external web server publish with isa 2006

Users viewing this topic: none

Logged in as: Guest

Printable Version

All Forums >> [ISA 2006 Publishing] >> Web Publishing >> external web server publish with isa 2006

Page: [1]

Message

<< Older Topic Newer Topic >>

external web server publish with isa 2006 - 23.Sep.2008 12:50:21 AM

shaun08

Posts: 2
Joined: 23.Sep.2008
Status: offline

hello all,
this is the senario i am trying to sort out. there is a web site that access is restricteed to only for our company ip's. and we are trying to publish that out to few contractors - but it need to be seen as if it came from our company.

i have tried setting up a internal web server and web publishing rule with link translation - did not work. page get translated properly but not as if came from isa server.

if this senario possible? reverse publish to an external web server using isa 2006. at the moment isa only got 1 nic with 2 internal ip's and setup as single nic server template.

thanks for any advice ...

Post #: 1

Featured Links*

RE: external web server publish with isa 2006 - 24.Sep.2008 9:12:01 AM

tshinder

Posts: 47490
Joined: 10.Jan.2001
From: Texas
Status: offline

Get a second NIC in that firewall so that you have security! HORK mode (single NIC) is not a security solution.

HTH,
Tom

_____________________________

Thomas W Shinder, M.D.
Sr. Consultant/Technical Writer
Prowess Consulting http://www.prowessconsulting.com/
Blog: http://blogs.isaserver.org/shinder/

GET THE NEW ISA 2006 Book!: http://tinyurl.com/2gpoo8

(in reply to shaun08)

Post #: 2

RE: external web server publish with isa 2006 - 25.Sep.2008 9:00:20 AM

shaun08

Posts: 2
Joined: 23.Sep.2008
Status: offline

Thanks Tom .. for your advice...
But isa is not at the edge. We just use it for cache and reverse proxy exchange / sharepoint etc.. there is a cisco edge device before this.
Do you have any advice for my query � is it possible to achieve with isa 2006. If needed, changes can be made to current isa config.
Thanks ..

(in reply to shaun08)

Post #: 3