Netmeeting - Video & audio but no chat / data? (Full Version)

All Forums >> [ISA Server 2000 General] >> H.323 Gatekeeper



Message


Guest -> Netmeeting - Video & audio but no chat / data? (2.Aug.2002 10:00:00 AM)

Configured H323 filter, protocol rule, ISA gatekeeper and netmeeting clients as per Learning Zone article on configuring Netmeeting (basic scenario). Have verified gatekeeper is configured to allow audio, video and T.120.

Am hosting meeting on a system inside the ISA server network, and making call from an external Internet client (standard dial-up connection for testing at this stage).

Call connects fine from the Internet based client, and I can receive video and audio, but the "Chat" application does not start up automatically as per normal. If I start it manually it comes up as "Not in a call" despite the fact that the call is active for audio and video. Call shows up fine in "Active calls" under the H323 gatekeeper node.

Only the client hosting the call has a camera attached. Also, I notice that netstat -na on the ISA server only shows up tcp port 1720 not other ports associated with netmeeting function?

Does anyone have any ideas on this?

Cheers

Justin




tshinder -> RE: Netmeeting - Video & audio but no chat / data? (7.Aug.2002 10:47:00 PM)

Hi Justin,

Do you have a Site and Content Rule and a Protocol Rule that allows you Netmeeting clients behind the ISA Server access to all protocols, all sites and content at all times?

Thanks!

Tom




Guest -> RE: Netmeeting - Video & audio but no chat / data? (12.Aug.2002 7:37:00 AM)

Hi Tom,

Thanks for the reply.

In response, the netmeeting "server" system behind the ISA server has unrestricted outbound access (i.e. Site & Content + Protocol rules as you specify in your post). The "connecting" client is comming in over a dial-up Internet connection so should have no retrictions. Have also tried connecting from clients within a remote corporate office with the same result?

Cheers

Justin




tshinder -> RE: Netmeeting - Video & audio but no chat / data? (13.Aug.2002 12:15:00 AM)

Hi Justin,

It should work then. Do you see the clients name as a registered client in the H323 ISA Management interface?

Thanks!

Tom




Page: [1]