• RSS
  • Twitter
  • FaceBook

Welcome to ISAserver.org

Forums | Register | Login | My Profile | Inbox | RSS RSS icon | My Subscription | My Forums | Address Book | Member List | Search | FAQ | Ticket List | Log Out

Routing between Internal and Perimeter.

Users viewing this topic: none

Logged in as: Guest
  Printable Version
All Forums >> [ISA Server 2004 Firewall] >> Network Infrastructure >> Routing between Internal and Perimeter. Page: [1]
Login
Message << Older Topic   Newer Topic >>
Routing between Internal and Perimeter. - 27.Jul.2006 4:40:37 PM   
NaotaKun

 

Posts: 11
Joined: 27.May2004
From: Sao Paulo, Brazil
Status: offline
Hi!
I've a question about routing on ISA Server 2004.

This is the scenario:
3 NIC ISA Server 2004 (on Windows Server 2003 SP1, both fully updated)
1 NIC on Internal network (172.16.x.y)
1 NIC on External network (public IP provided by ISP)
1 NIC on Perimeter (Several 10.x.y.z networks behind a Linux box, administered by a third-party team)

Premises are:
- The traffic between Internal and Perimeter has no restrictions and uses routing relationships (in ISA Server)
- There's no publishing at all.
- External interface serves only to Internal.

Following a recommendation in chapter 6 of Shinder's book, i've configured all possible routes between Internal and Perimeter BEFORE setting up ISA Server. So i've achieved the communication needed between Internal and Perimeter. Then set-up ISA Server, create rules and network relationships and everything "gone green".

Unfortunately, the Perimeter internal structure will change mostly every month, according to new projects. So the routing table has to be changed at same pace.
Question is: i can simply add the routes, network address, network and firewall rules OR i've to follow the book's recommendation and re-install ISA for each new route/network.

Thanks in advance!
(Sorry about the poor english.)
Fabio R Carvalho
Post #: 1
RE: Routing between Internal and Perimeter. - 3.Aug.2006 8:53:48 PM   
tshinder

 

Posts: 50013
Joined: 10.Jan.2001
From: Texas
Status: offline
Hi Fabio,

You can add new routes and definitions to the ISA firewall after it's been installed. That will work fine.

HTH,
Tom

_____________________________

Thomas W Shinder, M.D.

(in reply to NaotaKun)
Post #: 2

Page:   [1] << Older Topic    Newer Topic >>
All Forums >> [ISA Server 2004 Firewall] >> Network Infrastructure >> Routing between Internal and Perimeter. Page: [1]
Jump to:

New Messages No New Messages
Hot Topic w/ New Messages Hot Topic w/o New Messages
Locked w/ New Messages Locked w/o New Messages
 Post New Thread
 Reply to Message
 Post New Poll
 Submit Vote
 Delete My Own Post
 Delete My Own Thread
 Rate Posts