I've been following the new guide on using ISA 2006 EE to setup a main office/branch office VPN.
Everything goes ok, until at the end of part 5, after the branch office has connected to the main office css, the branch office loses its connection and doesn't manage to reconnect.
On checking the branch office array on the main office css, I see that although the last part of the branch office wizard has added the branch office server to the branch office array, it has not copied accross the vpn configuration (remote site vpn, network, network rules, firewall policy) that was originally placed in the local branch office css by the first part of the branch office wizard.
I would have expected the wizard to copy this stuff accross? I've read the 5 parts of the guide several times but can't see where I've going wrong. Anyone else run into difficulties?
It might take a few minutes after the machine restarts for the site to site VPN to establish. Go to the CSS machine to check the status of the connection to the branch office -- you'll see in the monitoring node that the site to site VPN is established and also the configuration update status for the branch office ISA Firewall.
|
My Subscription |
My Forums |
Address Book |
Member List |
Search |
FAQ |
Ticket List |
Log Out
Printable Version
All Forums >> [ISA 2006 Firewall] >> Branch Office >> problem at part 5 of branch office vpn guide 
problem at part 5 of branch office vpn guide - 
New Messages
No New Messages
Hot Topic w/ New Messages
Hot Topic w/o New Messages
Locked w/ New Messages
Locked w/o New Messages
Post New Thread