• RSS
  • Twitter
  • FaceBook

Welcome to ISAserver.org

Forums | Register | Login | My Profile | Inbox | RSS RSS icon | My Subscription | My Forums | Address Book | Member List | Search | FAQ | Ticket List | Log Out

FWC routing ISA server networks

Users viewing this topic: none

Logged in as: Guest
  Printable Version
All Forums >> [ISA 2006 Firewall] >> Firewall Client >> FWC routing ISA server networks Page: [1]
Login
Message << Older Topic   Newer Topic >>
FWC routing ISA server networks - 28.Mar.2007 11:48:50 PM   
emueller

 

Posts: 14
Joined: 15.Mar.2007
Status: offline
I have a perimeter network setup on my ISA 2006 server. When I install the firewall client on my PC it does not route into the perimeter network (should it?). If I set my gateway as the ISA server it will route into the perimeter network. The problem is the internal clients need their default gateway to point to our RSM so they can reach other VLANS, but they also must reach the perimeter network for resources that are published to the internet off of the ISA server.

< Message edited by emueller -- 28.Mar.2007 11:50:34 PM >
Post #: 1
RE: FWC routing ISA server networks - 5.Apr.2007 8:52:42 PM   
tshinder

 

Posts: 50013
Joined: 10.Jan.2001
From: Texas
Status: offline
You can configure them to use a LAN router that knows the gateway address to reach the perimeter network.

In any event, the Firewall client should not interfere with access to the DMZ network you created.

HTH,
Tom



_____________________________

Thomas W Shinder, M.D.

(in reply to emueller)
Post #: 2

Page:   [1] << Older Topic    Newer Topic >>
All Forums >> [ISA 2006 Firewall] >> Firewall Client >> FWC routing ISA server networks Page: [1]
Jump to:

New Messages No New Messages
Hot Topic w/ New Messages Hot Topic w/o New Messages
Locked w/ New Messages Locked w/o New Messages
 Post New Thread
 Reply to Message
 Post New Poll
 Submit Vote
 Delete My Own Post
 Delete My Own Thread
 Rate Posts