Welcome to ISAserver.org

Authentication bypass

Users viewing this topic: none

Logged in as: Guest

Printable Version

All Forums >> [ISA 2006 Web Proxy] >> General >> Authentication bypass

Page: [1]

Message

<< Older Topic Newer Topic >>

Authentication bypass - 30.Jan.2008 7:12:05 AM

moonstation

Posts: 2
Joined: 30.Jan.2008
Status: offline

Hi folks,

I trying to setup an ISA server without authentication, and after hours of
googling I always got back to that article about the "isa server with wireless
dmz", which is kinda pointless.
I think it also the part of the problem that I using linux clients, so the
setup is the following (which by the way works fine with authentication):

10.0.0.1 --- ISA --- 192.168.0.0
I have linux clients connecting through the isa server from the 10.0.0.0/24
network to the 192.168.0.0/24 network and I of course always get 407 from the
proxy.

Anyone know the solution?
Authentication not required checkbox WON'T solve this, that was the first
thing I tried.

Thanks

Post #: 1

Featured Links*

RE: Authentication bypass - 30.Jan.2008 9:24:14 AM

abqtech

Posts: 216
Joined: 9.Mar.2004
Status: offline

Create an Access Rule in ISA that specifies the "From network(s)" the "To network(s)" and "protocols" desired. And then set the Users tab to "All Users" All Users is equivelant to anonymous. Also make sure that the placement in your firewall policy is above any rules that require user authentication. That should do the trick!

(in reply to moonstation)

Post #: 2

RE: Authentication bypass - 31.Jan.2008 6:37:22 AM

moonstation

Posts: 2
Joined: 30.Jan.2008
Status: offline

Thanks it helped I had to enable all outboud traffic tho not only http,https,3128 ports otherwise I got error 502.
But the point was to make it work quick, and it only allows this bypass rule from a small ip range.

(in reply to abqtech)

Post #: 3

RE: Authentication bypass - 31.Jan.2008 8:41:06 AM