Welcome to ISAserver.org

1311 Error "no logon servers available" on Edge ISA for OWA 2007

Users viewing this topic: none

Logged in as: Guest

Printable Version

All Forums >> [ISA 2006 Publishing] >> Exchange Publishing >> 1311 Error "no logon servers available" on Edge ISA for OWA 2007

Page: [1]

Message

<< Older Topic Newer Topic >>

1311 Error "no logon servers available" on Ed... - 25.Feb.2008 5:43:47 PM

flakman

Posts: 15
Joined: 22.Dec.2007
From: California
Status: offline

Running Exchange 2007 SP1, Windows 2003 SP2, ISA 2006 w/Supportability Pack running a back-to-back scenario.

Logging in from inside is no problem. Logging in from the outside gives the error: "You could not be logged on to the ISA server. Make sure that your domain name, user name, and password are correct, and then try again."
If I change the Publishing Rule for the ISA boxes so that it allows All Users instead of Authenticated Users, I can log in. The problem is that I have configured the login for FBA UPN, but the login screen now only accepts just the username and password. No domain, no user@domain.com. Other than that, everything works correctly, not sure what may be wrong. I thank you in advance for any assistance.

Thanks.
John

Post #: 1

Featured Links*

RE: 1311 Error "no logon servers available" o... - 3.Mar.2008 2:29:57 PM

Snowfresh

Posts: 31
Joined: 18.Feb.2005
Status: offline

John,

I assume that your edge or front end firewall is not part of the domain?
So you have to use LDAP pre authentication. instead of Active Directory.

1. Create the access rule on the back-end ISA server to allow the traffic
from the front-end ISA server to the internal DC for authentication.
a. You can create a computer object for the front-end ISA server on the
back-end ISA server and input the IP address of the internal interface of
the front-end ISA server.
b. Create the access rule on the back-end ISA server as follows,
Rule name: Authentication OWA
Action: Allow
Protocol: All outbound traffic
Source: Newly defined computer object
Destination: Internal
Apply to: All users
c. Please move the rule to the top of the policy list and apply the change
immediately.

2. As the front-end ISA server is not the member of the domain, you need to
assign the LDAP server to perform the authentication. You can perform it
as follows,
1. Open the ISA Console, navigate to the Configuration node.
2. Click on the General node, click on Specify RADIUS and LDAP servers in
the middle pane of the console.
3. On the LDAP Server tab, input the detailed information of the LDAP
server. For example,
LDAP SERVER - FQND (this name should match the name of the Server Author
Cert on DC)
DESCRIPTION - ANYTHING
Type the Active Directory domain name ----domain.local
Make sure you only select "Connect LDAP server over Secure Connection")
Add Valid Credentials
Domain\administrator
password

Let me know if this works for you

(in reply to flakman)

Post #: 2

RE: 1311 Error "no logon servers available" o... - 27.Jan.2011 4:36:27 AM

mike.lee

Posts: 5
Joined: 26.Oct.2010
Status: offline

I understand this thread is a bit dated.
I am deploying web publishing on TMG server. And currently looking into Secured LDAP Connection.
Would like to find out for the domain user, what kind of domain permission is required?
Can I key in normal domain user ID with only user permission?

(in reply to Snowfresh)

Post #: 3