Here are the excerpt that i have obtained from ISA installation log :
12:50:50 ISA setup CA INFO : Running command line: C:\WINDOWS\ADAM\adaminstall.exe /answer:"C:\Program Files\Microsoft ISA Server\ADAM\\AdamAnsFile.ini" 12:51:10 ISA setup CA ERROR : Installation of the ISA instance (ADAM) failed. hr: 0x80074e46 12:51:10 ISA setup CA INFO : ADAM source log file: C:\WINDOWS\DEBUG\adamsetup.log, destination file: C:\WINDOWS\TEMP\ISAADAM_INSTALL_813.log 12:51:10 ISA setup CA ERROR : Failed to run ADAM setup. Error: 0x80074e46 12:51:10 ISA setup CA ERROR : ExecuteAdamSetup: Adam_Install(1) failed, hr=0x80074e46 12:51:10 ISA setup CA ERROR : ExecuteAdamSetup failed 12:51:10 ISA setup CA ERROR : DisplayPopup: Setup failed to install ADAM. (0x80074e46) 12:51:10 ISA setup CA INFO : UI Level is ok to display a message box 12:53:11 ISA setup CA ERROR : EXIT: InstallADAM, Custom Action failed (0x643)
Hi Hadi, Nowhere I said to install ADAM SP1 prior to installing ISA2006. Windows 2003 R2 has everything needed already. Please try it again following the order I wrote.
_____________________________
Regards, Kirill Corporate SAP Basis Administrator/Chief IT Security Officer, MSc, MCSE.
I did remove Win2003 SP2, and I still had the error when installing ADAM (through the ISA installation).
To make it work, I had to enable all communication between the first ISA servers (installed after Windows 2003 SP2) and the new server. A rule allowing all outbound traffic between server1 and server2 did the trick. Then it worked.
for me my OS was installed with windows 2003 R2 SP2 cd so SP2 was already on there. i recieved the ADAM error as well. to resolve i did the following: 1. copy isa 2006 install files to local drive on server 2. put the win2003 R2 SP2 Disk 2 in the cdrom
originally i got the error. after burning a new copy of the win2003 cdrom it worked fine. wierd part is that i had the win2003 disk 2 on the local drive of the server as well but isa2006 wants it in cdrom.
I did remove Win2003 SP2, and I still had the error when installing ADAM (through the ISA installation).
To make it work, I had to enable all communication between the first ISA servers (installed after Windows 2003 SP2) and the new server. A rule allowing all outbound traffic between server1 and server2 did the trick. Then it worked.
Hope it helps.
thanks mate. adding that rule to my first ISA server worked for me. i'm getting "setup has detected that unInstallShield is in use. please close inInstallShield and restart setup." and "error 432" at the very end of the install. anyone else getting this, and is it cosmetic or what?
I had this error code. Turned out I'd left a static route on the box which was preventing AD access. Removed this, re-introduced the machine (for good measure!) then it installed without a hitch.
ISA install running from local disk, R2 CD in the drive.