miopea -> Configuring RTMP (Port 1935) (25.Dec.2008 10:45:13 PM)
I apologize to those who may have read this on experts-exchange.com.
I have searched high and low to find a solution to a problem I am experiencing with my ISA 2006 server. This is what I am trying to accomplish:
1. Allow all traffic on port 1935 (RTMP) to freely flow past my firewall allowing my users to connect to an outside Flash Communication Server that needs port 1935.
2. Failing that, allow RTMP traffic to flow over port 80.
Even though I have created the protocol and rules for option 1, all I am seeing in the ISA monitor is a connection opened then closed. It is running the rule and recognizes the port, however, something is going wrong.
Since I could not get that work, I was hoping to set up direct access (since the Web Proxy filter is not overly pleased with non-HTTP traffic flowing over port 80) to the sites in question. The monitor is showing it try to connect, but I receive the following error:
Failed Connection Attempt
Log type: Web Proxy (Forward)
Status: 13 The data is invalid.
Source: Internal (192.168.0.xxx)
Destination: (domainname.com xxx.xxx.xxx.xx:80)
Filter information: Req ID: 0ec41e2e
The machine I am testing this with are running the ISA Firewall client. However, I have tried it without the client and just proxy, proxy and client and so on.
Any help would be GREATLY appreciated. My best case scenario would be to allow RTMP to flow through Port 1935 so I don't have to set up direct access sites.
I have noticed that the monitor is indicating that protocol RTMP (which I created for port 1935) opens a connection and then closes the connection right after.
Thank you in advance!