Welcome to ISAserver.org

ISA 2006 configuration

Users viewing this topic: none

Logged in as: Guest

Printable Version

All Forums >> [ISA 2006 General] >> Installation and Planning >> ISA 2006 configuration

Page: [1]

Message

<< Older Topic Newer Topic >>

ISA 2006 configuration - 5.May2010 9:25:20 AM

nitin.lokhande

Posts: 1
Joined: 5.May2010
Status: offline

Hi All,

Hope all are doing Well.

I have installed ISA 2006 server on dual NIC adapter pc.Two NiC adapter has been configured as Internal & External.We have one public ip adress and i have configured it for External NIC.
Described Access rule but still unable to access internet and RDP,ping to other internal network pc's.
Below are my queries.
1.The ISA server is not in Domain,it is in Workgroup-->is it right.
2.Should i need to connect direct internet line to one of the NIC adapter.
3.How to test it on Test environment.

Can anybody advise me on the above queries.

Thanks,
Nitin

< Message edited by nitin.lokhande -- 5.May2010 9:29:34 AM >

Post #: 1

Featured Links*

RE: ISA 2006 configuration - 25.May2010 5:51:53 PM

pwindell

Posts: 2244
Joined: 12.Apr.2004
From: Taylorville, IL
Status: offline

Hope all are doing Well.

Actually I have a headache,...but I'll make it,...it's almost time to go home :-).

I have installed ISA 2006 server on dual NIC adapter pc.Two NiC adapter has been configured as Internal & External.We have one public ip adress and i have configured it for External NIC.

Sounds good.

Described Access rule but still unable to access internet and RDP,ping to other internal network pc's.

By default Nothing can communicate directly to the ISA, or directly from the ISA,...except for what is defined in System Policies.

Below are my queries.
1.The ISA server is not in Domain,it is in Workgroup-->is it right.

No.

Debunking the Myth that the ISA Firewall Should Not be a Domain Member
http://www.isaserver.org/tutorials/Debunking-Myth-that-ISA-Firewall-Should-Not-Domain-Member.html

2.Should i need to connect direct internet line to one of the NIC adapter.

That "depends". It is not a simple "yes-or-no" question or answer.

3.How to test it on Test environment

Can't say,...don't know anything about the test environment you have available.

_____________________________

Phillip Windell

(in reply to nitin.lokhande)

Post #: 2