Static Routing for remote site (Full Version)

All Forums >> [ISA 2006 Firewall] >> Branch Office



Message


newitsupport -> Static Routing for remote site (8.Sep.2010 11:30:52 AM)

Hi,

I need to find a way from where i can access my remote site using static routing. IP's are as follows:

Head Office:
Internal Client
LAN 192.168.16.5
SM 255.255.255.0
GW 192.168.16.2 (ISA)
ROUTER
192.168.16.3
GW 255.255.255.0
VPN MODEM
LAN 192.168.0.1


Branch (pc direct from VPN MODEM)
192.168.20.100
SM 255.255.255.0
GW 192.168.4.1

scenario:
1. using 192.168.16.5, I can ping 192.168.4.1 but no luck for 192.168.20.100

2. Using 192.168.2.100, I can ping 192.168.0.1 but not for 192.168.16.5

Any helpfull advise?




newitsupport -> RE: Static Routing for remote site (8.Sep.2010 11:36:59 AM)

Corrections:

Branch: (PC DIRECT FROM VPN MODEM)

IP 192.168.4.2
SM 255.255.255.0
GW 192.168.4.1

-SCENARIO

1. Using 192.168.16.5, i can ping 192.168.4.1 and 4.2

2. Using 192.168.4.2 pc, I cant ping 192.168.16.x internal clients.




pwindell -> RE: Static Routing for remote site (16.Sep.2010 1:09:46 PM)

None of what you are showing makes any sense.

Please don't "wing it" on the terminology.  Please describe the environment in a standardized way using industry correct terminology.  Things like "PC direct from VPN modem" don't really have any meaning to me,...in fact in the over a decade I have been doing this I have never seen a "VPN Modem".

Also just because something "exists" does not describe how it is all built to work together.  All I can see it that you have 2 Sites and a "VPN",..that is all,...I cannot see how it is all put together and have know idea what type of VPN it is (Remote Access VPN, Site-to-Site VPN,etc)




Page: [1]