Help and steps to configure ISA 2006 Std with 2 nic (Full Version)

All Forums >> [ISA 2006 General] >> Installation and Planning



Message


makmas -> Help and steps to configure ISA 2006 Std with 2 nic (10.Jul.2011 6:14:59 AM)

Hi to all,


i have 2 servers 1st with windows 2008 (AD,DHCP & DNS)with IP 192.168.1.200 and 2nd is MEMBER Server windows 2003(192.168.1.201) with ISA 2006 Std having two NIC (INTERNAL AND EXTERNAL).

NOTE: DSL thomson modem with DHCP enable (the modem dns and dhcp is 192.168.1.254) ip range in modem (192.168.1.64 to 192.168.1.254)
i have disable the DHCP in the modem

INTERNAL ip range (192.168.1.0 to 192.168.1.255)

but the EXTERNAL connection connected directly to thomson modem and acquired ip from thomson modem (192.168.1.64) DNS and D.G 192.168.1.254.

CAN ANY ONE GUIDE STEP BY STEP. if any thing i miss you can ask,


thanking you

makmas
makmas@ymail.com




Xavier_arena -> RE: Help and steps to configure ISA 2006 Std with 2 nic (10.Jul.2011 6:31:21 AM)

hi,


Read this article for more details : Configuring ISA Server Interface Settings




makmas -> RE: Help and steps to configure ISA 2006 Std with 2 nic (18.Jul.2011 1:36:22 AM)

thanks alot for your reply arena.

i followed the article and its working fine, but i want this configuration with single adapter in isa server.
then what are the steps to follow.


thanks




elmajdal -> RE: Help and steps to configure ISA 2006 Std with 2 nic (13.Aug.2011 12:40:37 PM)

The External Card on ISA should only has IP/SM/DG , no DNS.

check these articles for details on the recommended config :

Jason Jones blog : http://blog.msfirewall.org.uk/2008/06/isa-servers-recommeded-network-card.html

Jim Harrison article : http://www.isaserver.org/tutorials/configuring_isa_server_interface_settings.html




Page: [1]