ISA behind an existing network and pick user out (Full Version)

All Forums >> [ISA Server 2004 Firewall] >> Network Infrastructure



Message

fsing1980 -> ISA behind an existing network and pick user out (11.Mar.2004 10:51:00 PM)

Hi,

My ISA2004 server is hooked up onto an existing network, but right now I need to connect a few access points to this existing network, and somehow let ISA control the traffic of these access points (as well as the laptops behind them). How do I setup the network so that the traffic from the access points will go thru ISA 2004 for authentication? Thanks a lot to whoever tries to help me out.. I am crying.

Frankie



tshinder -> RE: ISA behind an existing network and pick user out (12.Mar.2004 1:39:00 AM)

Hi Frankie,

If you go into the Exchange publishing section, you'll see a post I made regarding getting the FE/BE Exchange to work with the FE in the DMZ. That config file has the ARs required to join a domain from another network, as well as long on (and some Exchange stuff too). You can import that file into your test machine to see what the rules look like.

HTH,
Tom



fsing1980 -> RE: ISA behind an existing network and pick user out (13.Mar.2004 7:28:00 PM)

I checked out the exchange publishing session, and I have problem locating the article and the file u mentioned. Can you also tell me the link exactly? Also, I won't be using an Exchange server, will that be alright?

Thanks a lot



tshinder -> RE: ISA behind an existing network and pick user out (15.Mar.2004 3:24:00 PM)

Hi Frankie,

Check this out:

Here's my config file for the FE/BE Exchange Config with the Exchange FE in the DMZ. There is a route relationship between Internal and DMZ networks.

http://www.msfirewall.org/isa2004/exchangefebe/FEBE-BU.xml

Password:
password

HTH,
Tom



Page: [1]