denied connection port 1900 (Full Version)

All Forums >> [ISA Server 2004 Firewall] >> VPN



Message


pmol -> denied connection port 1900 (7.Dec.2004 7:30:00 PM)

Hi, I have used the vpn configurator to setup vpn access, and I can connect to the server, but finally get an access denied, probably due to protocol mismatch or something like that.

In the logfile I see the following message over and over. it has to do with port 1900 and some messages log port 138 but I don't know how to solve it.
any suggestions ?

Original Client IP Client Agent Authenticated Client Service Server Name Referring Server Destination Host Name Transport MIME Type Object Source Source Proxy Destination Proxy Bidirectional Client Host Name Filter Information Network Interface Raw IP Header Raw Payload Source Port Processing Time Bytes Sent Bytes Received Result Code HTTP Status Code Cache Information Error Information Log Record Type Log Time Destination IP Destination Port Protocol Action Rule Client IP Client Username Source Network Destination Network HTTP Method URL
192.168.1.254 FRAMESRV01 - UDP - - 1900 0 0 0 0xc004000d FWX_E_POLICY_RULES_DENIED 0x0 0x0 Firewall 12/7/2004 9:49:03 PM 239.255.255.250 1900 Unidentified IP Traffic Denied Connection Default rule 192.168.1.254 External Local Host - -

[ December 07, 2004, 09:47 PM: Message edited by: pm ]




tshinder -> RE: denied connection port 1900 (8.Dec.2004 2:55:00 PM)

Hi PM,

Those log file entries have nothing to do with the VPN configuration. However, if you don't want to see them, you can configure Access Rules to deny that traffic and then configure the rules to not log that traffic.

HTH,
Tom




pmol -> RE: denied connection port 1900 (8.Dec.2004 4:08:00 PM)

Hi,

Thank you for your reply, you're right, I can filter the traffic out to remove it from the log, but my problem is I am not able to setup a VPN connection.

So I was looking in the log to see what is going wrong.

The message I get at the VPN client is : The verification server did not respond in time to your verification request.

how can I troubleshoot this to see what is going wrong ?

thank you




Page: [1]