• RSS
  • Twitter
  • FaceBook

Welcome to ISAserver.org

Forums | Register | Login | My Profile | Inbox | RSS RSS icon | My Subscription | My Forums | Address Book | Member List | Search | FAQ | Ticket List | Log Out

FTP + firewall client = 425 error

Users viewing this topic: none

Logged in as: Guest
  Printable Version
All Forums >> [ISA Server 2000 Firewall] >> General >> FTP + firewall client = 425 error Page: [1]
Login
Message << Older Topic   Newer Topic >>
FTP + firewall client = 425 error - 17.Jan.2002 1:32:00 PM   
coolb4all

 

Posts: 10
Joined: 17.Jan.2002
Status: offline
I've been searching for a couple of days now but I can't get my ftp data connection up. It always hangs on "150 Opening ASCII mode data connection for /bin/ls". An ftp in DOS gives "can't assign requested address" when trying an "ls". I've applied SP1 but it didn't help. I've been doing test on my test-ISA even with ALL IP traffic allowed but nothing works. I'm using the firewall client. The connection works fine when I use a simple proxy server from another server.

Can anybody help me ?

Post #: 1
RE: FTP + firewall client = 425 error - 17.Jan.2002 9:41:00 PM   
jmunyan

 

Posts: 803
Joined: 3.Feb.2001
From: Seattle, WA
Status: offline
I read in the release notes about sp1 that client fw upgrade was something that needed to be done. Maybe that is the problem. You might want to update the fw clients. Check the release notes.

John


(in reply to coolb4all)
Post #: 2
RE: FTP + firewall client = 425 error - 18.Jan.2002 12:40:00 PM   
coolb4all

 

Posts: 10
Joined: 17.Jan.2002
Status: offline
I've already repaired the firewall client but without success.
Maybe you or somebody else can tell me which ports I have to open for a smooth ftp session and if I have to enable or disable the ftp application filter.


(in reply to coolb4all)
Post #: 3
RE: FTP + firewall client = 425 error - 24.Jan.2002 6:41:00 PM   
puntoini

 

Posts: 3
Joined: 24.Jan.2002
From: Rome, Italy
Status: offline
I've the same problem. I've tried every solution suggested in technet but i've always the same problem. I tryed to modify and build every kind of application filter, protocol rules etc. as suggested but no change. If u look for "can't assign requested address" on technet knol. base you'll find a lot of possible solutions, try to apply them and please let me know if you can solve your problem.

(in reply to coolb4all)
Post #: 4

Page:   [1] << Older Topic    Newer Topic >>
All Forums >> [ISA Server 2000 Firewall] >> General >> FTP + firewall client = 425 error Page: [1]
Jump to:

New Messages No New Messages
Hot Topic w/ New Messages Hot Topic w/o New Messages
Locked w/ New Messages Locked w/o New Messages
 Post New Thread
 Reply to Message
 Post New Poll
 Submit Vote
 Delete My Own Post
 Delete My Own Thread
 Rate Posts