Problem with contacting OWA 2003 through ISA 2004 server (Full Version)

All Forums >> [ISA Server 2004 Firewall] >> HTTP Filtering



Message

kkoster -> Problem with contacting OWA 2003 through ISA 2004 server (17.Dec.2004 10:41:00 AM)

Hi all,

I'm having the following problem.
From our LAN I need to contact a OWA 2003 (HTTP) server of another company. When I type in the URL it asks me for a username and password. It authenticates me, loads a couple of frames and than it ask for authentication again and again...

I have Cisco PIX as a permiter firewall. And I've installed a ISA 2004 server in Single NIC mode, for caching and HTTP filtering, as a proxy server.

The problem doesn't occur when I set up a session directly through the PIX firewall (skipping the ISA as a proxy).

Please Help. If you need additional information? Just ask.

Thanks in advance,

Karel



tshinder -> RE: Problem with contacting OWA 2003 through ISA 2004 server (17.Dec.2004 11:57:00 AM)

Hi Karel,

Why only one NIC in the ISA firewall? The PIX doesn't have one NIC, and neither should the ISA firewall! Get that fixed and we should be able to solve this problem quick.

HTH,
Tom

[ December 17, 2004, 11:59 AM: Message edited by: tshinder ]



Guest -> RE: Problem with contacting OWA 2003 through ISA 2004 server (19.Jan.2005 1:43:00 AM)

If they are only using the ISA server in cache mode they should only need one NIC.

My pet hate with ISA server is that in Cache mode it thinks it should be a filtering the content and still wants to be a firewall.

In this case the PIX is the firewall hence it has two NICs. The ISA server should butt out and do what it's told, i.e. cache.

The original question still needs to be answered.

Svend



kkoster -> RE: Problem with contacting OWA 2003 through ISA 2004 server (19.Jan.2005 9:30:00 AM)

Thanks Svend for your support on this case. Still haven't solved the problem. It also occurs on ISA servers with 2 nic's.

Karel



Guest -> RE: Problem with contacting OWA 2003 through ISA 2004 server (4.Feb.2005 10:41:00 PM)

I have the same problem with SBS from several different locations. That is, the problem is generic to ISA server and not just your installation. Still looking for the solution.

Larry
lmilask@sbs.ideatech.com



kwasson -> RE: Problem with contacting OWA 2003 through ISA 2004 server (12.Feb.2005 12:34:00 AM)

bump this subject back up. I have the exact same problem. the number of Nic's doesn't matter for this problem. Mine happens to have 2 and i have ironed out most of problems i have ran into except for this last one. I need to connect to OWA of another company and going strait to the PIX, no problem. Try and use the isa server (rule doesn't matter either, if i am authenticated, using sNAT or firewall client, if i am going through a rule that allows all users or only a group, if i filter outbound traffic or leave it wide open, or if the network rule is a NAT or route none of that matters) and you can't get more than the frame outline of OWA and maybe a "loading" screen but that is it and it will prompt you over and over for username/password until you finally get access is denied.
all i can think of is that the isa server is automatically populating domain info into the logon request to the remote domain which of coarse the remote domain doesn't know. oh also authentication type doesn't matter.



cybernard -> RE: Problem with contacting OWA 2003 through ISA 2004 server (8.Jul.2005 4:54:00 AM)

Has someone tried username@remotedomain.com then password in the bellow form? Or remotedomain\username then password. I know it looks naive, but it might work.



Page: [1]