Posts: 15
Joined: 11.Jun.2002
From: Rapid City, SD
Status: offline
I'm having problems using OutLook through my ISA/StarBand setup. I'm able to surf the web and filter out the bad guys, but I cannot get to my external POP3/SMTP provider. I configured my ISA/StarBand accordingly:
Server 360 #1 (224.0.0.1 is the multicast address) IP Protocol: Custom Protocol number: 2 Direction: both This computer (on the perimeter network): 172.21.1.254 This remote computer: 224.0.0.1
Server 360 #2 (for the Starcontrol software to "check" the modem (part of the Ibqossvc Module)) IP Protocol: UDP Direction: Both Local Port: Fixed port - 1880 Remote Port: Fixed port - 1880 This computer (on the perimeter network): 192.168.255.252 This remote computer: 239.192.19.1
Server 360 #3 (for the Starcontrol software to "check" the modem (part of the Ibqossvc Module)) IP Protocol: UDP Direction: Both Local Port: All ports Remote Port: Fixed port - 1880 Default IP address on the external interface This remote computer: 192.168.255.252
AS Agent #1 (the Internet Page Accelerator) IP Protocol: TCP Direction: Both Local port: All ports Remote Port: Fixed port - 9877 Default IP address on the external interface All remote computers
AS Agent #2 (the Internet Page Accelerator) IP Protocol: TCP Direction: Both Local port: All ports Remote Port: Fixed port - 9876 Default IP address on the external interface All remote computers
I setup the "Protocol Rules" to allow all the email items, but I can't seem to get the packet filters to let send/receive. I can get to my mail on the other side of the ISA/StarBand server but that's not going to work. Any assistance would most appreciated.
Posts: 15
Joined: 11.Jun.2002
From: Rapid City, SD
Status: offline
I did tried to setup the packet filters, but still couldn't get through.
This is what I setup:
POP3 IP Protocol: TCP Direction: Inbound Local port: Fixed port - 110 Remote Port: All remote computers Default IP address on the external interface All remote computers
SMTP IP Protocol: TCP Direction: Outbound Local port: Fixed - 25 Remote Port: All remote computers Default IP address on the external interface All remote computers
RE: StarBand / ISA / OutLook 2002 - 9.Nov.2003 4:45:00 PM
Guest
so they should be something like:
POP3 IP Protocol: TCP Direction: Outbound Local port: All ports Remote Port: Fixed port - 110 Default IP address on the external interface All remote computers
SMTP IP Protocol: TCP Direction: Outbound Local port: All Ports Remote Port: Fixed port - 25 Default IP address on the external interface All remote computers
Posts: 15
Joined: 11.Jun.2002
From: Rapid City, SD
Status: offline
Thanks "markt" for trying, but still no joy. I tried a couple of variations but it still does not work. Anymore ideas from yourself or anybody would be great.
RE: StarBand / ISA / OutLook 2002 - 9.Nov.2003 8:04:00 PM
Guest
Try telnetting to port 25 and/or port 110 on the mail server and see if you can, after creating the packet filters in my post (dont forget to restart the services afterwards )
If that doesn't work you can give me a shout on MSN Messenger (marcus_toovey[at]hotmail.com)
Posts: 15
Joined: 11.Jun.2002
From: Rapid City, SD
Status: offline
I addition to the current Outlook problem, I can't do a ping or nslookup from the client. Any help on any of these problems willbe greatly appriciated by myself and I'm sure all other Starband users. Thanks.